www.plxtech.com flexible & versatile pci express ? switch . features ? pex 8509 general features o 8-lane pci express switch - pcie gen 1 (2.5gbps) integrated serdes o up to eight ports (x1, x2, x4) o 15mm x 15mm, 196-ball pbga pkg. o typical power: 1.2 watts ? pex 8509 key features o standards compliant - pci express base specification, r1.1 - pci power management interface specification r1.2 o high performance - cut-through with low packet latency - max payload size of 1024 bytes - non-blocking switch fabric - full line rate on all ports o flexible configuration - 8 flexible and configurable ports (x1, x2 or x4) - lane and polarity reversal - configurable through i 2 c, host software, eeprom or strapping pins o pci express power management - link power management states: l0, l0s, l1, l2/l3 ready, and l3 - device states: d0 and d3hot o quality of service (qos) - one virtual channel per port - eight traffic classes per port - weighted round-robin ingress port arbitration o reliability, availability, serviceability - 3 standard hot-plug controllers supporting pci shpc spec r1.0 - transaction layer end-to-end crc - poison bit support - basic and advanced error reporting support - per port error diagnostics ? bad dllps ? bad tlps ? crc errors and more - fatal error (fatal_err#) signal (legacy serr equivalent) - inta# signal - port status bits - eight software controllable general purpose output (gpo) signals - jtag boundary scan low-power 8-lane, 8-port expresslane tm pcie switch the pex 8509 device offers pci express switching capability conforming to the pci express base specification revision 1.1. th is device enables users to add scalable high bandwidth, non-blocking interconnects at the lowest cost to a wide variety of applications including communications platforms, consumer products, servers, storage systems, blade servers, industri al systems and embedded-control products. the pex 8509 can be used as a fan-out , aggregation , or peer-to-peer switch, and is well-suited for control plane applications, docking stations, dvrs, multi- function printers, industrial control systems, medical imaging systems, embedded systems and amc modules. port configurations the pex 8509 offers eight lanes and up to eight ports supporting x1, x2 and x4 lane widths. the ports can be configured for symmetric (each port having the same lane width and traffic load) or asymmetric (ports having different lane widths). in the event of asymmetric traffi c, the pex 8509 features a flexible central packet memory that allocates a memory bu ffer for each port as re quired by the application or endpoint. this buffer allocation along with the device's flexible packet flow control minimizes bottlenecks when the upstream and aggregated downstream bandwidths do not match (are asymmetric). high performance the pex 8509 architectur e supports packet cut-thru with low latency (118ns). this, combined with large packet memory (up to 1024 byte maximum payload size) and non-blocking internal switch architecture , provides full line rate on all ports for performance hungry applications such as docking stations, control planes, embedded systems and amc modules. end-to-end packet integrity the pex 8509 provides end-to-end crc protection (ecrc) and poison-bit support to enable designs that require end-to-end data integrity . these features are optional in the pci express specification, but plx provides them across its entire expresslane switch product line. configuration flexibility the pex 8509 provides several ways to configure its operations. the device can be configured through strapping pins, i 2 c interface , cpu configuration cycles, or an optional serial eeprom. this allows for easy debug during the development phase, performance monitoring during the operation phase, and driver or software upgrade. interoperability the pex 8509 is designed to be fully compliant with the pci-sig pci express base specification revision 1.1. additionally, it supports auto-negotiation , lane reversal , and polarity reversal . the pex 8509 also undergoes extensive interoperability testing in plx?s interoperability lab. low power with granular serdes control the pex 8509 provides low power capability that is fully compliant with the pci express power management specification. for even lower power, the serdes physical links can be programmed for desired power or turned off when unused. pex 8509 version 1.2 2007
www.plxtech.com port configurations the lane width of each port can be individually configured through auto-negotiation, hardware strapping, host software configuration, i 2 c interface, or through an optional eeprom. the pex 8509 supports 4 port configurations: 1) one x1 upstream port and seven x1 downstream ports 2) one x2 upstream port and six x1 downstream ports 3) one x2 upstream port and the downstream ports as one x2 and four x1 4) one x4 upstream port and four x1 downstream ports figure 1. port configurations for eight-lane configurations not shown in figure 1, please use the pex 8508 device which offers more configuration options in an 8-lane switch. hot plug for high availability hot plug capability allows users to replace hardware modules and perform maintenance without powering down the system. the pex 8509 hot plug capability and advanced error reporting features make it suitable for high availability (ha) applications . ports 1, 2 & 3 include a standard hot plug controller . if the pex 8509 is used in an application where one or more of its downstream ports connect to pci express slots, hot plug controllers on the three downstream ports can be used to manage the hot plug event of its associated slot. fully compliant power management for applications that require power management, the expresslane pex 8509 devices support both link (l0, l0s, l1, l2/l3 ready, and l3) and device (d0 and d3hot) power management states, in complian ce with the pci express power management specification. serdes power and signal management the expresslane pex 8509 supports software control of the serdes outputs to allow optimization of power and signal strength in a system. the plx serdes implementation supports four levels of power ? off, low, typical, and high. the serdes block also supports loop-back modes and advanced reporting of error conditions , which enables efficient debug and management of the entire system. port arbitration the pex 8509 switch supports hardware fixed and weighted round-robin ingress port arbitration . this allows fine tuning of quality of service and efficient use of packet buffers and the system bandwidth. applications suitable for docking stations, contro l plane applications, multi-function printers, dvrs , industrial control systems, medical imaging systems, embedded systems & amc modules, the pex 8509 can be configured for a wide variety of form factors and applications. docking station the pex 8509 is the most cost-effective pci express switch that can be used in a docking station application. figure 2 shows four x1 downstream ports connecting two pcie end- points, a network card and an expresscard to a single x4 upstream port. the pex 8509?s ho t-plug feature is extremely useful for the plugging/un-plugging of expresscards. figure 2. docking station pex 8509 x1 pex 8509 x4 pex 8509 x2 x1 x1 x2 x1 x1 x1 x1 all x1 pex 8509 x2 all x1 x1 x1 pex 8509 pex 8509 x1 pex 8509 pex 8509 x4 pex 8509 pex 8509 x2 x1 x1 x2 x1 x1 x1 x1 all x1 pex 8509 pex 8509 x2 all x1 x1 x1 4 1 1 docking station 1 1 pex 8509 end point south bridge north bridge cpu usb/sata/ge memory mother board graphics network end point 4 1 1 1 docking station 1 1 1 1 pex 8509 pex 8509 end point south bridge north bridge cpu usb/sata/ge memory mother board graphics graphics network network end point
www.plxtech.com adapter card aggregation the number and variety of pci express native-mode devices is growing quickly. as these devices become mainstream, it will be necessary to create multi-function and multi-port adapter cards with pci express capability. the pex 8509 can be used to create an adapter or mezzanine card that aggregates the pci expr ess devices into a single port that can be plugged into a backplane or a motherboard. figure 3 shows the pex 8509 in this application. figure 3. aggregation adapter card control plane application the pex 8509 is ideal for migrating existing pci control planes in routers to high-speed pci express interface to meet increased packet processing need s. figure 4 shows a controller card with a pex 8509 connecting the control processor to as many as seven line cards each via a x1 port. this usage model provides connectivity to multiple line cards giving the processor control over a large number of line cards in mid- range routers. figure 4. control plane control planes for larger systems for larger systems that need more than 8 ports, two pex 8509 devices can be linked together to provide up to 14 ports. figure 5 shows such an application. the two pex 8509 devices together provide connectivity for up to 13 line cards each via an x1 link. the cont rol processor connected to a pex 8509 via an x1 port on the controller card in this example can control up to 13 different line cards. figure 5. control plane for large systems redundant control plane applications for those systems that need re dundant control planes, the pex 8509 can be used in conjunction with the pex 8508 which supports non-transparent bridging. with the nt port, the pex 8508 can connect to a redundant control card providing fail-over support. an added benefit of the pex 8509 & pex 8508 combination design is the increased fan-out capability ? it is now possible to connect a total of 9 line cards to the controller card. figure 6. redundant control plane ge ge ge 1 1 4 1 1 ge pex 8509 mac/phy mac/phy mac/phy mac/phy ge ge ge 1 1 4 1 1 ge pex 8509 pex 8509 mac/phy mac/phy mac/phy mac/phy line card 1 line card 7 controller card controller card co-processor- security/dsp local processor npu/asic framer phy control processor memory pex 8509 switch up to 7 x1 cards line card 1 line card 7 controller card controller card co-processor- security/dsp local processor npu/asic framer phy control processor memory pex 8509 pex 8509 switch switch up to 7 x1 cards control processor memory pex 8508 pex 8509 controller card control processor memory pex 8508 port #1 redundant control card ntb pex 8509 port #9 to line cards to line cards lc #9 lc #1 switch switch switch switch fabric card ge ports to fabric control processor memory pex 8508 pex 8508 pex 8509 pex 8509 controller card control processor memory pex 8508 pex 8508 port #1 redundant control card ntb pex 8509 pex 8509 port #9 to line cards to line cards lc #9 lc #1 switch switch switch switch switch switch switch switch fabric card ge ports to fabric controller card controller card control processor memory pex 8509 to line cards pex 8509 7 ports 6 ports controller card controller card control processor memory pex 8509 pex 8509 to line cards pex 8509 pex 8509 7 ports 6 ports
www.plxtech.com ? 2007 plx technology, inc. all rights reserved. plx and the plx l ogo are registered trademarks of plx technology, inc. express lane is a trademark of plx technology, inc., which may be registered in some jurisdiction. all other product names that appear in this material are for identification purpo ses only and are acknowledged to be trademarks or registered trademarks of their respective companies. information supplied by plx is believed to be accurate and reliable, but p lx technology, inc. assumes no responsibility for any errors that may appear in this material. plx technology, in c. reserves the right, without notice, to make changes in produc t design or specification. 8509-sil-pb-1.2 march 2007 software usage model from a system model viewpoint, each pci express port is a virtual pci to pci bridge device with its own set of pci express configuration registers. it is through the upstream port that the bios or host can configure the other ports using standard pci enumeration. the virtual pci to pci bridges within the pex 8509 are compliant to the pci and pci express system models. the configuration space registers (csrs) in a virtual primary/secondary pci to pci bridge are accessible by type 0 configurati on cycles through the virtual primary bus interface (matching bus number, device number, and function number). interrupt sources/events the expresslane pex 8509 switch supports the intx interrupt message type (compatible with the pci 2.3 interrupt signals) or message signaled interrupts (msi) when enabled. interrupts/messages are generated by the pex 8509 for hot plug events, baseline error re porting, and advanced error reporting. development tools plx offers the pex 8509rdk which includes hardware and software tools to enable rapid customer design activity. these tools consist of a hardware module, hardware documentation and a software development kit (sdk). expresslane tm pex 8509rdk the rdk hardware module includes the pex 8509 with one upstream x4 port and four downstream x1 ports. the pex 8509rdk hardware module can be installed in a motherboard, used as a riser card , or configured as a bench-top board. the pex 8509rdk can be used to test and validate customer software. additionally, it can be used as an evaluation vehicle for the pex 8509 features and benefits. sdk the sdk tool set includes: - linux and windows drivers - c/c++ source code, objects, libraries - user?s guides, application examples, tutorial plx technology, inc. 870 w. maude ave. sunnyvale, ca 94085 usa tel: 1-800-759-3735 tel: 1-408-774-9060 fax: 1-408-774-2169 email: info@plxtech.com web site: www.plxtech.com product ordering information part number description pex 8509-aa25bi 8-lane, 8-port pci express switch pex 8509-aa25bi g 8-lane, 8-port pci express switch pb-free pex 8509rdk-4 pex 8509 rapid development kit with x4 connector (5 ports) pex 8509rdk-1 pex 8509 rapid development kit with port expander (8 ports) please visit the plx web site at www.plxtech.com or contact plx sales at 408-774-9060 for sampling. figure 7. pex 8509rdk
|
